References
References marked on instrument or in instruction manual:
Warning of a potential danger, comply with instruction manual.
Reference! Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Caution! Hot surface.
Continuous double or reinforced insulation complies with category II DIN
EN 61140.
Conformity symbol, the instrument complies with the valid directives. It
complies with the EMV Directive (89/336/EEC), Standards EN 50081-1
and EN 50082- are fulfilled. It also complies with the Low Voltage
Directive (73/23/EEC), Standard EN 61010-1is fulfilled
Instrument fulfills the standard (2002/96/EG) WEEE
CAT III/600V
Instrument complies to Measurement Category CATIII/ 600V against Earth.
Measurement category: CAT III/ 600V. In case of the use of measurement
accessories, the measurement category is defined by the lower value from
accessories or multimeter.
Description of measurement categories:
CAT I: for measurements performed on circuits not directly connected to
mains, i.e. battery powered instruments.
CAT II: for measurements performed on circuits directly connected to the low
voltage installation, i.e. household appliances, portable tools and
similar equipment.
CAT III: for measurements performed in the building installation, i.e. distri-
bution boards, circuit breakers, wiring, including cables, bus-bars,
junction-boxes, switches, socket-outlet in the fixed installation, and
24