Product Description - VOLTCRAFT VC-10 Notice D'emploi

Product Description

The measuring values are indicated on a digital display on the multi-
meter (hereafter called DMM) as well as on an analog bar display.
The measuring value display of the DMM comprises 4000 digits
(digit = smallest display value).
A rear positioning foot provides a slightly slanted position, which
facilitates reading off the display in measuring operation.
The individual measuring ranges are selected via the rotary switch in
which „auto range", the automatic range selection, is active. The
appropriate range of measurement is set for each application indivi-
dually.
The automatic cutoff is active in normal operation to protect the bat-
teries of the measuring device. However, this can be deactivated
manually. To do so, keep the button „MODE" depressed when tur-
ning the device on. The clock symbol (4E) disappears. After turning
off, the automatic cutoff is active again.
The power section shows an absolute novelty. With this measuring
device, it is no longer necessary to replace an accidentally triggered
fuse. The installed fuse resets automatically after triggering.
The measuring leads are permanently attached to the measuring
device. They can be stored in the rear casing compartment.
Two button cell batteries type LR 44 are required for power supply.
Two spare batteries can be stored in the battery compartment.
37