Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.1. I want to have a swim
1
2
x5
3
Your immersion detector is no longer
monitoring, the red light is flashing.
4.2. Automatic restart
x1
Your immersion detector is in
monitoring mode (green indicator light
flashing)
While the immersion detector is monitoring
(green indicator light), move the magnet
over the swimmer symbol in the activation
area of your device:
The red indicator light on your immersion
detector comes on, you can have a swim
without setting off the siren.
After the swim or deactivation of the device,
your immersion detector automatically
resumes monitoring as soon as the pool is
still again. The automatic restart can take
place about 10 minutes after the end of the
swim, depending on the disturbance in the
pool and the wind conditions.
DURING THIS TIME, YOUR POOL IS
NOT PROTECTED.
UTMOST VIGILANCE IS REQUIRED
FROM THE PARENT/RESPONSIBLE
ADULT.
Your immersion detector continuously
checks the pool disturbance conditions.
As soon as your pool becomes still again,
after a swim or strong disturbance (strong
wind, counter-current swimming, etc.) your
immersion detector resumes monitoring
and the green light flashes.
Your pool is now protected.
19
Publicité
Table des Matières
