Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.1. Attachment of rigid tube
1
Carefully insert the rigid tube to a sufficient
depth (about 3 cm).
3.2. Insertion of the batteries
1
Unscrew the 4 screws.
3
Remove the battery block fastened by a
Velcro strip.
5
x 15
x15
Insert the batteries, making sure the polarity
is respected. Validation sound signal (15
short, high-pitched beeps). Your device is in
"off mode".
2
x 2
x2
Screw the 2 self-drilling screws (provided
with the fastening kit)
2
Remove the cover.
4
6
5
Publicité
Table des Matières
