Philips PSD1211 Mode D'emploi page 11

Charging with the adapter
It takes approximately 3 hours to fully charge the
Philips BlueControl.
1 Put the European or UK mains plug in the
adapter and lock it into place.
2 Insert the standard USB plug into the socket
on the adapter.
3 Insert the adapter into the wall socket
(100V-240V).
4 Insert the micro USB plug into the socket on
the Philips BlueControl.
, When the Philips BlueControl is connected to
the mains, it beeps once and the LED indicator
starts flashing green slowly to indicate that
charging has started.
5 When the Philips BlueControl is fully charged,
the LED indicator lights up solid green.
6 Remove the adapter from the wall socket and
pull the micro USB plug out of the micro
USB socket on the Philips BlueControl.
ENGLISH
11