Philips PSD1211 Mode D'emploi page 21

Problem
The LED indicator
does not flash
green when the
micro USB plug is
inserted into the
micro USB socket
of the Philips
BlueControl.
The Philips
BlueControl
becomes warm
during use.
Possible cause
The adapter is
not inserted
or not inserted
properly into the
wall socket.
The standard
USB plug is
not inserted or
inserted properly
into the adapter.
The wall socket is
not live.
This is normal.
ENGLISH
Solution
Insert the adapter into the
wall socket properly.
Insert the standard USB plug
into the adapter properly.
Connect another appliance to
the same wall socket to check
if the wall socket is live. If the
wall socket is live, but the
Philips BlueControl does not
charge, contact Philips.
No action required.
21