Device Setup; Motor Offset - HQ Power ARAS 170S VDPL170MH17 Mode D'emploi

3. Select the desired setting:
<No>: to keep the display readout in the normal position.
o
<Yes>: to rotate the display readout by 180°.
o
Display Language
You can set the display language to English or Chinese. If the display language is set to Chinese, you can set it
to English as follows:
1. Press MENU to open the menu.
2. Highlight the fourth item in the menu list that appears and press ENTER to confirm.
3. Again, highlight the fourth item in the menu list that appears and press ENTER to confirm.
4. Highlight the first item in the menu list that appears and press ENTER to confirm.
The display texts now appear in English.
7.3

Device Setup

Inverse Pan and Tilt Movement
You can inverse the direction of the pan and/or tilt movement:
1. Press MENU to open the menu.
2. Select <Motor Setup>, then select <Pan Inverse> or <Tilt Inverse>.
3. Select the desired setting:
<No>: to keep the normal panning/tilting direction on this device.
o
<Yes>: to inverse the panning/tilting direction on this device.
o
Pan and Tilt Encoding
It may happen (for example because of a power surge) that the device deviates from the correct neutral
pan/tilt position (pan and tilt = 0°). You can choose whether the device will automatically correct the pan/tilt
position when this happens.
1. Press MENU to open the menu.
2. Select <Motor Setup>, then select <Pan Encode Enable> or <Tilt Encode Enable>.
3. Select the desired setting:
<No>: to disable the pan/tilt auto-correction system.
o
<Yes>: to enable the pan/tilt auto-correction system.
o

Motor Offset

The motor offset function allows you to fine-tune the default positions of pan, tilt, and any other moving parts
of the device.
1. Press MENU to open the menu.
2. Select <Motor Setup>, then select <Motor Offset>.
3. Select the moving part that you want to fine-tune:
<Pan>: pan
o
<Tilt>: tilt
o
<Color>: colour wheel
o
<Gobo1>: gobo wheel 1
o
<R-gobo1>: rotation of gobo wheel 1
o
<Gobo2>: gobo wheel 2
o
<Prism>: prism
o
<R-prism>: rotation of the prism
o
<Focus>: focus
o
<Frost>: frost effect lens
o
<Iris>: iris.
o
4. Fine-tune the moving part (0–255).
V. 01 – 10/02/2014
VDPL170MH17
6 ©Velleman nv