Threading The Needle On The Left - Janome 3434D Livret D'instructions

1
4
5
6
7
1
(A)
1
2
44
2
3
(B)
2
•

Threading the Needle on the Left

Place the spool of thread on the left side spool pin.
* The points to thread for needle on the left are
marked in orange.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide on the
left from back to front.
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
1
Thread guide
2. Pass the thread through the holes on the left of
thread guide plate as illustrated.
2 Thread guide plate