Start-Up; Functionality And Adjustment Of The Temperature - Vitrifrigo D20A Manuel D'instructions

8. START-UP

Once the refrigerator has been connected to the power supply, it will automatically start
up in thermostatic mode and it will not be necessary to perform further operations for its
correct operation.
For a reasonable arrangement and storage of food follow the following table:
Clean meat and finish
Butter or margarine
Cooked foods, cakes and soups
Cold cuts, fresh pasta, creams, puddings,
chocolate, pastries, animal fats

9. FUNCTIONALITY AND ADJUSTMENT OF THE TEMPERATURE

The refrigerator works according to a refrigerant vapour compression cycle to transfer heat
between the air in the inner compartment and the outer one. The refrigerant, by extracting
heat from the air in the evaporator, evaporates and enters the compressor. Here, the
refrigerant undergoes an increase in pressure and temperature. It then passes through the air
condenser, where it is condensed. Finally, through the capillary tube, the refrigerant returns to
the evaporator and the cycle is repeated. This refrigerator (in all versions) is equipped with an
electronic thermostat for automatic temperature maintenance.
A B
A Compressor error LED
B ON/STANDBY
C FREEZER mode key
On/Standby
To turn on the refrigerator, press the relative button for 1 second. Now all functions
are active.
Refrigerator mode
In refrigerator mode, it is possible to choose between 4 different temperature levels;
to change the set, press the corresponding key (F).
22 ENG
Food
Eggs
C D
Preservation
Method of preservation
time
2 or 3 days
Exclusively wrapped or closed in
1 month
airtight containers and placed in
1 week
the fridge after they have cooled
3 or 4 days
down if previously heated
3 or 4 days
E
D NIGHT MODE key
E Setting indication LED
F Setting key
F