SR Suntour COIL SPING Serie Mode D'emploi page 10

SR SUNTOUR - OWNERS MANUAL
Reinstall the plastic cover cap again.
Cut the cable to a proper length. Approxi-
mately 12mm is recommended.
Install a cable end cap at the end of the
cut cable using a needle nose pliers.
If the fork does not lock, the tension of the
cable is probably too low. In this case you
have to increase the tension of the cable
by turning the adjustment barrel counter-
clockwise. If the cable's tension is too high
and the fork does not unlock, you have to
turn the adjust barrel clockwise.
NRX / NCX LITE / NCX / NVX / NEX / CR9V / CR8V V2
CUT
12mm
Adjustment
Barrel
Adjustment
Barrel
9
English