CAPITAL SPORTS ERGO 1G Mode D'emploi page 23

Display-Aufbau
Das Display consists of two fields:
The „lying L" at the bottom and right side of the display shows current training parameters (TIME, RPM/SPEED, DIS-
TANCE, WATT/CALORIES, PULSE and USER)
The middle section is a single dot matrix with 16 x 12 pixels, showing information on the at the time active programme.
Display modes
Press any button or move the pedals to start up the device (it will give a longer beep indicating the power is on). For
the period of 2 seconds all display elements will turn in order to run a screen test. Then the device turns into the normal
mode (see figures above)
The display turns off after 4 minutes without any operation or without any pedal movement.
The device can handle 4 useres. The display shows „USER 0" as long as no user is created. Create a user by pressing
one of the arrow buttons (up/down) on the device to select USER 1 - 4. Confirm pressing ENTER and follow the steps
below.
• Choose your SEX (you can choose using the arrows (UP/DOWN) and confirm with ENTER.
• Put in your AGE (press ENTER to confirm)
• Put in your HEIGHT
• Put in your WEIGHT (kg)
• The user profile will be saved
SEX (Geschlecht)
Using the training computer
Display
Functions and programming
Create user
AGE (Alter) H.t. (Körpergröße) W.t. (Gewicht in kg)
23