Key Refrigerator Dimensions; Assemble The Enclosure For The Refrigerator - Norcold 10 Serie Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Key Refrigerator Dimensions

These key refrigerator dimensions are for your reference as
necessary (See Art 02623).
Refrigerator cabinet width w/o trim:
23.25 in. max. ............................................................. 1
Refrigerator width overall w/ trim:
24.75 in....................................................................... 2
Refrigerator cabinet to side trim:
0.82 in......................................................................... 3
Refrigerator cabinet height w/o trim:
59.62 in. max. ............................................................. 4
Refrigerator height overall w/ trim:
62.41 in....................................................................... 5
Refrigerator cabinet to:
Top trim
1.30 in. ................................................... 6
Bottom trim 1.37 in. .................................................. 6
Enclosure wall to hinges:
3.20 in......................................................................... 7
Refrigerator cabinet to center of handles:
41.5 in......................................................................... 8
Assemble the Enclosure for the
Refrigerator
1. Make sure the enclosure is 59.88 - 60.01 inches high x 23.50 - 23.63 inches wide x 24 inches deep.
2. Make sure the floor is solid and level.
- The floor must be metal or a wood panel and extend the full width and depth of the enclosure.
- The floor must be able to support the weight of the refrigerator and its contents.
3. Make sure there are no adjacent heat sources such as a furnace vent, a hot water heater vent, etc.
4. If there is more than 1/2 inch between either side of the refrigerator and the inside of the enclosure:
- Fill the space with fiberglass insulation or add a baffle to eliminate the excess clearance.
- Make sure that the rear of the batt-type insulation is between 18 - 19 inches from the face of the enclosure.
- Securely attach the batt-type insulation to the enclosure so that it remains in this position during refrigerator installation, if it
becomes wet, and in windy conditions.
1
3
7
5
Art 02623
6
4
8
6
Installation Manual 5

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

N10lxNa10lx

Table des Matières