Switching On - Renkforce DA-2300 Notice D'emploi

Switching on

The product's mains switch (6) must be off. Insert the mains plug (9) into a
power supply socket (230 V ~ / 50 Hz).
• Before switching on the product, check that all connections are correct.
• Turn the volume control (3) to the "MIN" setting, far left.
• Switch on the signal sources such as your CD player.
• Now turn on the product at the mains switch (6).
• Turn the volume control (3) to the right until you reach the desired volume.
• You can change the sound with the bass and treble controls (4) and (5).
In case of high volumes and/or highly turned up sound controls, check for dis-
tortions and turn down the volume control or the sound controls immediately to
prevent damage to the loudspeakers.
• To switch the product off, turn the volume control (3) back to the "MIN" setting, far left. Switch
off the product again at the mains switch.
If you do not observe this order, the loudspeaker or the amplifi er could be
damaged.
28
All manuals and user guides at all-guides.com
Operating manual
English