Renkforce DA-2300 Notice D'emploi page 31

Status
Distortions can be heard
No bass is audible
Playback is without treble
All manuals and user guides at all-guides.com
Possible cause
The product input is activated at
too high a signal level
The volume is set too high and
the loudspeakers distort
The sound controls for bass (4)
and treble (5) are set too high
Load capacity/impedance of the
connected loudspeaker too low
One loudspeaker is connected
the wrong way
The bass control (4) on the
product is set to minimum
The treble control (5) on the
product is set to minimum
Remedy
Connect amplifi er inputs
to the corresponding cinch
outputs
Adjust the input sensitivity
using the "SIGNAL IN" (2)
button
Reduce the volume on the
product
Turn down the sound con-
trols
Connect suitable loud-
speaker
Connect loudspeaker cor-
rectly
Adjust the bass control (4)
Adjust the treble control (5)
31