Maintenance; Cleaning The Refrigerator; Removing The Drawers - Vitrifrigo DRW Serie Manuel D'installation

8. MAINTENANCE

8.1

Cleaning the refrigerator

OUTSIDE
EN
Clean the outside of the refrigerator with a sponge or soft cloth. Do not use solvents or abrasive
products.
INSIDE
Clean the inside with warm water and some bicarbonate of soda or vinegar. Rinse and dry carefully with
a soft cloth. Do not use abrasive products. If the appliance is not going to be used for a prolonged period,
in order to avoid mould and unpleasant smells, remove the plug, empty the refrigerator and clean the
inside before leaving the door ajar.
8.2

Removing the drawers

The drawers may be removed for cleaning and maintenance purposes.
To remove the upper drawer, first disconnect the spring cable highlighted in the diagram, then press
the levers.
To remove the spring cable, use a certain amount of force on the connector (dashed arrow) and rotate
the ring nut by 90° anti-clockwise.
Once the connection has been removed, apply pressure to the levers (solid arrows) and remove the
drawer.
To remove the lower drawer, press the side levers since there is no connector to release.
61