Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8634289
b.
A glove is optional for the hand holding the powder gun as it should
contact the skin for a proper grip.
3.
Wear protective clothing designed for the work environment and tool.
4.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
5.
Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
a.
Wear a dust mask rated grade P2 when spraying powder or cleaning it
up from the work area.
b.
Wear an activated charcoal respirator when curing the powder. The
dust mask is not adequate to handle the curing fumes.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific function.
Do not modify or alter this tool or use it for an unintended purpose.
2.
Verify that all connections are secure before operating the air powder
coating machine.
3.
Know how to stop the compressor and bleed the pressure quickly in case
of an emergency. Be thoroughly familiar with the compressor controls.
4
Air Powder Coating Machine
For technical questions call 1-800-665-8685
V 4.0
Publicité
Table des Matières
