Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8634289
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function properly
or parts are missing. If unable to do so, have a qualified technician service the tool.
Problem(s)
Possible Cause(s)
Air flows
Airflow blocked by dirt.
slightly from
nozzle.
Air regulator in closed position. Open the air regulator to desired airflow.
Erratic
Excessive drain on the air hose
performance.
or Incorrect size or type of hose
connectors.
Moisture or restriction in the air
hose/tank
Air compressor provides
insufficient airflow.
Too little material in the canister. Refill the powder canister.
16
Air Powder Coating Machine
For technical questions call 1-800-665-8685
Suggested Solution(s)
Check air inlet filter and nozzle for
blockage. Clean if necessary
Check the air hose and confirm the hose
fitting is correct for the inlet bushing.
Depressurize system. Drain tank and air
hose of water.
Ensure tool is connected to a
compressor with a rate flow that
matches the tool's requirement.
V 4.0
Publicité
Table des Matières
