Work Area; Personal Safety; Personal Protective Equipment - Power Fist 8634289 Manuel D'utilisateur

Appareil pneumatique de revêtement en poudre
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

V 4.0
DANGER!
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
NOTICE!
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.

WORK AREA

1.
Operate in a safe work environment. Keep your work area clean, well lit and
free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock tools away and keep out of the reach of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
5.
Always make sure that the area is well ventilated when using indoors to
remove toxic fumes from the curing process.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
A non-permeable glove such as nitrile or silicone is suitable for the
hand manipulating the object being sprayed.
Visit www.princessauto.com for more information
Air Powder Coating Machine
8634289
3

Publicité

Table des Matières
loading

Table des Matières