Product Information; Product Overview; Installation Variants And Installation Dimensions; Variant A - Installation In Wall-Mounted Cabinets With Hinged Doors - Berbel BGU 125 L Manuel De Montage

Product information

2. Product information
2.1

Product overview

The device expands the equipment options for the extractor
hood.
 Observe the extractor hood instructions.
A
B
C
D
E
F
A Cover grille
B Adapter frame (if necessary)
C Base housing
D Filter flap
E Recirculated air filter BUF GU
F Tube element (if necessary)
2.2

Installation variants and installation dimensions

The device is suitable for two installation variants:
y Variant A - installation in wall-mounted cabinets with
hinged doors.
y Variant B - installation in wall-mounted cabinets with front
lifting fitting.
Dimensions for installation in wall cabinets:
y Width (inside cabinet) at least device width + 1 mm.
y Depth (cabinet body) min. 300 mm.
y Height (lower edge of cabinet to lower edge of cover grille):
y Variant A min. 500 mm, max. 940 mm.
y Variant B min. 560 mm, max. 1000 mm.
y Side wall thickness 16 - 19 mm.
y If a niche back panel is used, it is necessary to consider
the thickness of the niche back panel.
y If a spice rack is installed, it is necessary to consider the
installation depth of the device.
y A distance of 100 mm must be retained between the
cover grille and ceiling for the ventilation outlet.
y The rear edge of the device must be installed flush with
the rear edge of the cabinet.
6004941_0 – 29.08.2019
2.2.1 Variant A - installation in wall-mounted
cabinets with hinged doors
2 1 1
1
2
3
P
2.2.2 Variant B - installation in wall-mounted
cabinets with front lifting fitting
2 1 1
1
2
3
P
4 8
1
≥ 3 0 0
4 8
1
≥ 3 0 0
53