Health Advice; Additional Safety Instructions - Evolution EvoMAG42 Traduction De La Notice Originale

www.evolutionpowertools.com
tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
(2.6)
5) General Power Tool Safety Warnings
[Service]
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
(2.7)

HEALTH ADVICE

WARNING: When using this machine, dust
particles may be produced. In some instances,
depending on the materials you are working
with, this dust can be particularly harmful.
If you suspect that paint on the surface
of material you wish to cut contains lead,
seek professional advice. Lead based paints
should only be removed by a professional
and you should not attempt to remove it
yourself. Once the dust has been deposited
on surfaces, hand to mouth contact can result
in the ingestion of lead. Exposure to even low
levels of lead can cause irreversible brain and
nervous system damage. Young and unborn
children are particularly vulnerable.
You are advised to consider the risks
associated with the materials you are working
with and to reduce the risk of exposure. As
some materials can produce dust that may
be hazardous to your health, we recommend
the use of an approved face mask with
replaceable filters when using this machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
(2.8)
WARNING: the operation of any power tool
can result in foreign objects being thrown
towards your eyes, which could result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles
or safety glasses with side shield or a full face
shield where necessary.
(9.0)

ADDITIONAL SAFETY INSTRUCTIONS

WARNING: Mains Power Supply Security.
Due to the nature of operation of this
machine, it is of the utmost importance to
ensure the security and continuity of the
mains power supply.
Ensure that this machine has a dedicated
power supply, and use a lock on device
to ensure that the mains power supply
cannot be interrupted or compromised
accidentally.
Do not use other appliances on the same
power socket, as any variation in voltage
caused by other connected appliances
could result in the magnet deactivating.
Always use the tool on its own dedicated
power socket.
Where the power supply is provided
by an 'onsite' generator set, ensure
that the generator set is reliable and
well maintained, and that the fuel
tank contains sufficient fuel to allow
completion of the task. The addition of
warning labels is strongly recommended.
9
EN
ES
FR
TR