Health Advice; Additional Safety Instructions; Transporting And Handling - Evolution EVOMAG42 Notice Originale

HEALTH ADVICE

WARNING: When using this machine, dust
particles may be produced. In some instances,
depending on the materials you are working
with, this dust can be particularly harmful.
If you suspect that paint on the surface
of material you wish to cut contains lead,
seek professional advice. Lead based paints
should only be removed by a professional
and you should not attempt to remove it
yourself. Once the dust has been deposited
on surfaces, hand to mouth contact can result
in the ingestion of lead. Exposure to even low
levels of lead can cause irreversible brain and
nervous system damage. Young and unborn
children are particularly vulnerable.
You are advised to consider the risks
associated with the materials you are working
with and to reduce the risk of exposure. As
some materials can produce dust that may be
hazardous to your health, we recommend
the use of an approved face mask with
replaceable filters when using this machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
WARNING: the operation of any power tool
can result in foreign objects being thrown
towards your eyes, which could result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles
or safety glasses with side shield or a full face
shield where necessary.

ADDITIONAL SAFETY INSTRUCTIONS

WARNING: Mains Power Supply Security.
Due to the nature of operation of this
machine, it is of the utmost importance to
ensure the security and continuity of the
mains power supply.
Ensure that this machine has a dedicated
power supply, and use a lock on device
www.evolutionpowertools.com
to ensure that the mains power supply
cannot be interrupted or compromised
accidentally.
Do not use other appliances on the same
power socket, as any variation in voltage
caused by other connected appliances
could result in the magnet deactivating.
Always use the tool on its own dedicated
power socket.
Where the power supply is provided
by an 'onsite' generator set, ensure
that the generator set is reliable and
well maintained, and that the fuel
tank contains sufficient fuel to allow
completion of the task. The addition of
warning labels is strongly recommended.

1) TRANSPORTING and HANDLING

Magnetic Drills are heavy machines, care must
be taken when transporting and handling.
• When transporting or moving the Magnetic
Drill, always use the carrying handle or
other carrying aids provided.
• Always ensure that the dovetail slide is in
its lowest position and locked in place.
• Do not transport or move the Magnetic
Drill with a cutter attached.
• If the coolant feed system is fitted, ensure
that the coolant feed tap is in the off position,
or the coolant system has been drained.
• If the Magnetic Drill is to be transported in
a vehicle ensure that it is laid on its side and
is secured to prevent movement.
• Do not transport the Magnetic Drill with
the mains cord and plug dragging along
the ground.
• Never carry or drag the machine using the
mains cord.
Carrying your Magnetic Drill
Safety Advice
• Although compact, this Magnetic Drill is
heavy. To reduce the risk of back injury, get
competent help, if required, whenever you
have to lift the drill.
• To reduce the risk of back injury, hold
the tool close to your body when lifting.
Bend your knees so you can lift with your
legs, not your back. Lift by using the
8