GE GFD85 Guide De L'utilisateur Et Instructions D'installation page 34

STACKING THE WASHER AND DRYER
INSTALL THE APPROPRIATE
3
BRACKETS TO THE WASHER
Washer Depth Dryer Depth
32" 32"
34" 32"
Select the appropriate brackets for your model sizes.
Using the outside holes in the bracket, attach it to the
top left corner of the washer back using 4 screws.
Repeat on the top right corner of the washer back.
32 Brackets for 32" Washer & Dryer Combinations:
Attach
brackets to
washer using
4 screws on
each side
Install brackets flush at
washers edges
34 Brackets for 34" Washer & 32" Dryer Combinations:
Attach
brackets to
washer using
4 screws on
each side
Install brackets flush at
washers edges
34
Installation Instructions
Bracket Number
32
34
Do not install brackets
overhanging washers edges
OR
Do not install brackets
overhanging washers edges
(Optional Kit GFA28KITN)
PREPARE THE WASHER AND
4
DRYER
A. Place the washer in the approximate final
installation location.
B. Make sure the washer is level. Refer to the washer
Installation Instructions for details.
C. Upright the dryer.
D. Reverse the washer and dryer door swings, if
desired, before stacking the dryer on the washer.
See the washer and dryer Installation Instructions
for details.
49-3000206 Rev 1