Hotpoint HTM 1720 V Doppia Mode D'emploi page 30

9. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower
door to the property position.
10. Make the middle hinge reverse the direction180oC, then transfer it to the left property position.
Make the middle hinge pin in the upper hole of the lower door, then tight the bolts.
11. Place the upper door back on. Ensure the door is aligned horizontally and vertically so that the
seal are closed on all sides before finally tightening the top hinge. Then inert the top hinge and
screw it to the top of unit and then fix hinge cover (in accessary bag) by screw.
12. Fix the screw cover.
unscrew
30