Troubleshooting Guide - Arrma VENDETTA 3S 4x4 1/8 3S BLX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem and LED Indi-
cator
Motor won't operate. LED
single pulses.
Motor won't operate.
short single pulses.
Motor won't operate. LED
pulses repeating.
Motor won't operate. LED
short pulses repeating.
No throttle or steering on
with single short pulse
repeating.
ESC LED INDICATOR
LED Indicator
ESC turned On, LED
Red LED illuminated
Red and Green LED
illuminated
short single pulses
short single pulses
short pulses repeating
short pulses repeating
short pulses repeating

TROUBLESHOOTING GUIDE

Error Mode
LVC has been
activated.
below the LVC setting.
The ESC is in
The ESC is taking too
mode.
The ESC has
The ESC is damaged.
failed the self test.
Capacitor
There is too much load
temp has been
on the drive system for
exceeded
the ESC to support.
Throttle trim not at
N/A
LED Code
Throttle trigger is in the
neutral zone
ESC is operating in
forward throttle
ESC is at full throttle,
full brake or full reverse
LVC protection
activated
The ESC is in thermal
The ESC has exceeded the
continuous current limit
The ESC has failed the
self test
Capacitor temp has
been exceeded
Possible Causes
Battery voltage is
much load.
Consider making changes to gear
Send the ESC to a Horizon Hobby
gearing to reduce the load on the ESC,
or change your driving habits to reduce
neutral.
19
Solution
Verify the battery is charged.
cool before resuming operation.
ratio to reduce load to the ESC.
service center for service.
Consider changing the battery or
the load.
on transmitter to neutral. Turn
back on.
WWW.ARRMA-RC.COM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ara4319v3t1Ara4319v3t2

Table des Matières