Arrma VENDETTA 3S 4x4 1/8 3S BLX Mode D'emploi page 17

Only use fully charged LiPo batteries (4.2V per cell) to prevent
battery/ESC damage.
Motor wires x 3
Power Switch & Set button
Input Voltage 2S-3S LiPo (7.4-11.1v) 50C 5000mAh
Minimum Req. 6-8 Cell NiMh (7.2v-9.6v)
Connect batteries, turn on TX and press/hold the set button 'A'. Turn the switch on
1. TX in neutral - press set
Battery Plug
2. TX full throttle - press set
BEC Output 6.0v/4A Max
3. TX full brake - press set
17
WARNING: Heat sink
may be hot after use.
Receiver Plug (CH2)
B
A
WWW.ARRMA-RC.COM