Setup Menu - DeFelsko PosiTest AT-A Manuel D'instructions

Close
Stops the recording process, closes the current batch, and
removes batch information from the display.
Delete
Removes a batch and associated measurements from memory.
Pull Parameters
Select desired parameter using the
screen. Use the
Dolly Size: Select the dolly size being utilized for the test (10,
14, 20, 50, or 50 x 50 mm)
Rate: User selectable pull rate (unit/sec). Specified rate is
maintained for the duration of the test.
Limit: Pressure will build-up until the set Limit is reached or the
dolly is pulled from the surface, whichever occurs first. By default,
the instrument will pull to the maximum limit for selected dolly size
(see Technical Data pg.16).
Hold Time:
pressure is
(up to 60 seconds)
maintained (held)
at defined Limit.
Default: 0 seconds
Orientation
Rotates display between landscape (default) or portrait views.
Ideal for use in horizontal or vertical positions.

Setup Menu

and buttons to adjust.
10
buttons or touch
Hold Time is
displayed on
the pull chart
(shaded area)
Defined
Hold Time