DeFelsko PosiTest AT-A Manuel D'instructions page 15

Sync Batches
Select batches to flag them for synchronization to the PosiTector
App. Sync Batches is useful when connecting a new device to
an instrument with pre-existing batches, since only batches
created while Bluetooth Smart is enabled are automatically
selected.
Selected batches are synchronized when the next reading is
taken in a batch flagged for synchronization, or when the Sync
Batches option is selected at the bottom of the list of selected
If Bluetooth Smart is disabled or disconnected, data
from batches selected in the Sync Batches menu are held in a
queue until communication with the PosiTector App is re-
established.
Send Batches
Transfers selected batches to the PosiTector App. Send Batches
is useful when switching between devices, as only readings and
batches that have yet to be synchronized with any smart device
are synchronized automatically.
The Send Batches option is visible in the menu when the
instrument is connected to a smart device running the PosiTector
App.
Determine if a software update is available for your instrument.
See www.defelsko.com/update
after an update. All stored measurements will be erased from
memory.
The instrument will perform a Hard Reset (pg. 11)
14