Memory Menu; Setup Menu - DeFelsko PosiTest AT Guide D'utilisation

The PosiTest AT-A stores 100,000 readings in up to 1,000 batches.
Stored measurements can be reviewed on-screen or accessed via
computers, tablets and smart phones.
New Batch
Closes any currently opened batch and creates a new memory
batch, named using the lowest available number (example: B2).
New batches are date stamped when they are created.
Open
Selects a previously created batch to open and make current.
Close
Stops the recording process, closes the current batch, and
removes batch information from the display.
Delete
Removes a batch and associated measurements from memory.
NOTE:
For further details on memory options, refer to the full
instruction manual at: www.defelsko.com/manuals
Pull Parameters
Select desired parameter using the
screen. Use the
Dolly Size: Select the dolly size being utilized for the test (10,
14, 20, 50 mm or 50x50)
Rate: User selectable pull rate (unit/sec). Specified rate is
maintained for the duration of the test.
Limit: Pressure will build-up until the set Limit is reached or the
dolly is pulled from the surface, whichever occurs first. By default,
the instrument will pull to maximum for selected dolly size (see
Technical Data pg.16).

Memory Menu

Setup Menu

and buttons to adjust.
11
PosiTest AT-A
buttons or touch