DeFelsko PosiTest AT-A Manuel D'instructions page 4

Touch Screen Display
Use the touch screen to interact with menu options. Swipe
horizontally to navigate between views or vertically to move
between batch readings. Alternatively, the directional buttons can
be used for navigation.
Main View (shown with memory batch open)
Pull Chart
displays
pressure
over time
Dolly
Size
Pull Rate
Dolly Preparation
1. To remove oxidation and contaminants, place the included
abrasive pad on a flat surface and rub the base of the dolly
across the pad 4-5 times.
2. As required, remove residue left from the abrading process
using a dry cloth or paper towel.
Coating Preparation
1. Lightly roughen the coating using the included abrasive pad.
NOTE:
As coating abrasion may introduce flaws, it should
only be used when necessary to remove surface contaminants,
or when the bond strength between the glue and the coating
is insufficient for pull testing.
Carousel:
indicates the current view. Swipe horizontally
Limit
Pull Parameters (pg. 10)
Dolly & Coating Preparation
or use arrow keys to switch between views.
Hold Time
WiFi Bluetooth USB
3
(pg. 7)
Current
Reading
Battery
(Status icons)