Exit The Menu; Reset To Factory Settings - DELTACALOR MONZA Notice D'utilisation Et D'installation

Reset to factory settings

All thermostat settings will be loaded with the factory settings.
If you press the , key, the thermostat resets the settings to the factory default settings.
The thermostat is reset to the predefined factory settings:
•Nominal temperatures;
•SETTINGS;
•Reset the time;
•Energy consumption;
•WIFI settings.
Consumption recording menu
This mode is only available if the radiator power has been
configured by the user.
Press to change the time interval for the power
consumption display (last 24 hours, last 7 days and lasts 30
days).
If you do not press any key, the thermostat will return
automatically to the previously selected
mode.
Press to return to the Menu
CONFIGURATIONS.
If you press or
power consumption values are restored.
Another way to exit the settings menu is to
press and hold the
If you press you stop the unit.
The estimated values are saved in the me-
mory every 4 hours and every time the user
displays this menu.
If POWER OFF is active, the values are
maintained for the next 12 hours.

EXIT THE MENU

Press the button
for a few seconds, the
key for a few seconds.
to exit the WIFI menu.
[ 55 ]