Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Automatic mode
In this mode, the thermostat will
follow the chosen programme
(from P1 to P9 integrated or from
U1 to U2 customised) according to
the real time and the Comfort and
reduced
set temperature.
On the main screen, the key
enables you to switch from the dis-
play of the measured temperature
to the set temperature.
If the user presses the keys
, they can ignore the temperature
of the current programme for up
to 2 hours by changing the value.
The value starts flashing and can be
changed.
If you press the
key or wait 15
seconds without taking any action,
the value of the setting is confir-
med. The symbol of a hand is dis-
played when the
override function is activated. This
override continues until the next
phase (the programme switches to another temperature setpoint) or for a maximum of 2 hours.
If you press the
, key, the navigation menu will be displayed.
If you press the
, key, the thermostat will switch off.
Frost protection mode
In this mode, frost protection, the
temperature setting will be monitored
all the time. On the main screen, if you
press the
and
, keys, the frost
protection temperature setting will
start to flash and can be changed. If
you press the
key or wait 15 se-
conds without taking any action, the
setting point of the value is confirmed.
On the screen saver (backlighting ac-
tivated),
you can change the mea-
sured temperature display to the set
temperature.
If you press the
, key, the navigation menu is displayed.
If you press the
, ikey, the thermostat is turned off.
Preset value: 7°C
Interval: from 0.5°C to 10°C.
and
[ 47 ]
Publicité
Table des Matières
