DELTACALOR MONZA Notice D'utilisation Et D'installation page 45

To change the current mode of the thermostat, the user must press the right navigation key to
access the menu selection.
The user moves the frame cursor to select a
working mode.
To select a mode, press
Confirm the selected mode by pressing the
key aotherwise the thermostat will auto-
matically return to the last selected mode
, , , o .
By touching , users can access the heating
on/off mode immediately:
MODE SELECTION MENU
.
If there is no activity on the keypad for 5 to
10 seconds, a screen saver is displayed
This screen saver could be the value of the
measured or zero temperature:
[ 45 ]