DELTACALOR MONZA Notice D'utilisation Et D'installation page 41

FIXINGS THE WALL BRACKETS
1. Before mounting the radiator to the wall, check that the dis-
tances shown in the drawings "INSTALLING THE DEVICE"
are respected (see p.5).
2. Determine by looking at the table here below your radiator
model and respect the heights and width indicated to mount
the wall brackets For help with installation, refer to drawings
1 and 2 (see next page).
Potenza
900 W
1500 W
1800 W
3. Secure the brackets to the wall using cleats (not supplied) adap-
ted to the wall structure on which the radiator is positioned.
4. Once fixed, close the security system with the screws as indi-
cated on drawing 3 (see next page)..
Screws and tiles are not supplied
H L
500 mm 260 mm
500 mm 500 mm
500 mm 660 mm
H = Height fixing holes
L = Width fixing holes
NOTE
[ 41 ]
Fixing
3
3
3