Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Definition of operating modes
Comfort mode
In this mode, temperature of the
comfort setting will be followed
all the time. On the screen saver
(backlighting on), if you press the
key
or
, keys, the set tempe-
rature for comfort starts flashing
and you can change it. If you press
the
key or wait 15 seconds wit-
hout taking any action, the value of
the setting is confirmed. This set-
ting will be used in
ring the high phase of the selected
programme.
.
From the screen
saver (backlight on) if you press
you can switch the display from the measured temperature to the set temperature
If you press the
, key, the navigation menu will be displayed.
If you press the
, key, the thermostat is deactivated.
Preset value: 19°C.
Interval: 10°C to 30°C. (the maximum value can be changed in the settings menu).
Eco mode
In this mode, the unit operates at
a reduced configured temperature.
On the screen saver (backlighting
activated), if you press on key
or
, the reduced configuration
temperature starts flashing and you
can change it.
If you press the
key or wait 15
seconds without taking any action,
the value of the setting is activated.
This setting will be used in
mode
during the high phase of
the selected programme
On the screen saver (backlight on),
the
key allows you to switch the display to from the measured temperature to the set tem-
perature
If you press the
, key, the navigation menu will be displayed.
If you press the
, key, the thermostat is deactivated.
Preset value: 17°C.
Range: 5.0°C to 19°C (or 0.5°C lower set temperature if lower).
mode du-
.
[ 46 ]
Publicité
Table des Matières
