Other Convenient Functions - Sharp R-922STWE Mode D'emploi

Notes :
1. The cooking time cannot be input until the preheating temperature arrives. When the oven arrives
at desired temperature, the door must be opened to input the cooking time.
2. The convection heater will stop automatically; if there is no input of the cooking time within 5 min-
utes. An audible signal will sound fi ve times to remind you and the LED will display the time of day, if
the clock has been set. If the clock has not been set, the display will only show "0:00".
3. When the oven is preheating, the turntable should remain in the oven. During preheating and con-
vection cooking, you will hear the cooling fan cycling on and off . This is completely normal and does
not aff ect the cooking.
4. Food manufacturers instructions are only a guideline, so cooking times may need to be adjusted
5. After cooking is complete the cooling fan will continue working for a short time to lower the tem-
perature of the electrical and mechanical parts.
6. You may detect smoke or a burning smell when using convection for the fi rst time. This is normal
and is not a sign that the oven has malfunctioned. To avoid this problem, when fi rst using the oven,
heat the oven without food for 20 minutes on grill and then convection at 240ºC.
IMPORTANT: During operation, to allow smoke or smells to disperse open a window.
WARNING:
The door, outer cabinet, oven cavity and accessories will become very hot during
operation. To prevent burns, always use thick oven gloves.
1. SEQUENCE COOKING
This function quickly defrosts food while enabling you to choose a suitable defrost period, depending
on the food type. Follow the example below for details on how to operate this function. The time range
is 0:05 – 95:00. This function allows you to cook using up to 2 diff erent stages which can include manual
cooking time or time defrost as well as weight defrost function. Once programmed there is no need to
interfere with the cooking operation as the oven will automatically move onto the next stage. An audi-
ble signal will sound once after the fi rst stage. If one chosen stage is defrosting, this should be the fi rst
stage of sequence cooking.
Note: AUTO MENU cannot be set as one of the multiple sequences.
Example: If you want to defrost the food for 5 minutes, then to cook with P80 microwave power
for 7 minutes. The steps are as follows:
- 1. Press the WEIGHT/TIME DEFROST button twice, in the LED display d-2 will appear.
- 2. Enter the defrosting time by rotating the ENTRY dial until the display shows "5:00" minutes.
- 3. Press the MICRO.POWER button once.
- 4. Input the power level by pressing the MICRO.POWER button once more for P80 or turn the ENTRY
dial to select the microwave power to P80.
- 5. Press the START/+30sec./ENTER button to confi rm the setting.
- 6. Enter the cooking time by rotating the ENTRY dial until the display shows "7:00" minutes.
- 7. Press the START/+30sec./ENTER button to start cooking.
2. +30sec FUNCTION (Direct start)
The START/+30sec./ENTER button allows you to operate the following function:
CONVECTION COOKING

OTHER CONVENIENT FUNCTIONS

GB-20