Other Convenient Functions - Sharp R-343 Mode D'emploi

Masquer les pouces Voir aussi pour R-343:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 52
NOTE:
• When the oven starts, the oven lamp will illuminate and the turntable will rotate clock-
wise or anticlockwise.
• If the door is opened during cooking/defrosting to stir or turn over food, the cooking
time on the display will stop automatically. The cooking/defrosting time starts to count
down again when the door is closed and the START/+30sec./ENTER button is pressed.
• When cooking/defrosting is complete, the time of day will reappear on the display, if the
clock has been set.
• If you wish to know the power level during cooking, press the MICRO. POWER button. The
current power level will displayed for 3 seconds.
1. SEQUENCE COOKING
This function allows you to cook using up to 2 diff erent stages which can include manual
cooking times, time defrost as well as a weight defrost function. Once programmed there
is no need to interfere with the cooking operation as the oven will automatically move
onto the next stage. An audible signal will sound once after the fi rst stage. If the defrost
function is needed within sequence cooking - please note that this should always be the
fi rst stage of sequence cooking.
NOTE: AUTO MENU cannot be set as one of the multiple sequences.
Example: If you want to cook food for 20 minutes on P100 microwave power and then
for 5 minutes with P80 microwave power. The steps are as follows:
- 1. Press the MICRO. POWER button, P100 will appear in the LED display.
- 2. Press the START/+30sec./ENTER button once to confi rm the setting.
- 3. Enter the cooking time by rotating the ENTRY dial until the display shows "20:00" minutes.
- 4. Press the MICRO. POWER button, P100 will appear in the LED display.
- 5. Press the MICRO. POWER button twice or rotate the ENTRY dial to select the micro-
wave power to P80.
- 6. Press the START/+30sec./ENTER button once more to confi rm the setting.
- 7. Enter the cooking time by rotating the ENTRY dial until the display shows "5:00" minutes.
- 8. Press the START/+30sec./ENTER button to start cooking.
2. +30sec FUNCTION (Auto minute)
Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing
the START/+30sec./ENTER button. The cooking process will start immediately and each
time the button is pressed this will increase the cooking time by 30 sec.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
MICROWAVE COOKING

OTHER CONVENIENT FUNCTIONS

GB-18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

R343s

Table des Matières