Thermador SPH60GWS Mode D'emploi page 12

STEP 2.1: Connect your appliance to your
home network with WPS
Please enter STEP 2.1 only when prompted by the app.
The following steps describe operations at the appliance
itself.
NOTE: To connect the hood to your home network, the
hood and the lights must be OFF.
You can cancel the process at any time by pressing 0.
1. Press and hold the CONNECT button until 0 and
CONNECT flash.
2. Press 1.
-- 1 and CONNECT will flash.
3. Press the WPS button on your router.
-- Please consult your router's manual to locate the
WPS button.
-- When CONNECT and 3 flashes your appliance is
connected to the home network.
-- The app will get notified once your appliance has
been successfully connected to your Wi-Fi
network.
4. Follow the directions in the app.
NOTICE:
ERROR: If the CONNECT and 2 light flashes then the
appliance could not establish a connection with your
home Wi-Fi within 2 minutes.
FIX: Check whether your appliance is in range of your
Wi-Fi and repeat the process. If unsuccessful, refer to
STEP 2.2 to connect the appliance manually.
STEP 2.2: Connect your appliance to your
home network step-by-step
Please enter STEP 2.2 only when prompted by the app.
The following steps describe operations at the appliance
itself.
NOTE: To connect the hood to your home network, the
hood and the light must be OFF.
You can cancel the process at any time by pressing 0.
1. Press and hold the CONNECT button until 0 and
CONNECT flash.
12
2. Press 2.
-- 2 and CONNECT will flash.
-- The appliance will open a temporary Wi-Fi
network called "HomeConnect" with the
password "HomeConnect" for 2 minutes.
-- The app provides your home Wi-Fi network name
(SSID) and its password via this temporary Wi-Fi
network to the appliance enabling the appliance
to connect to your home Wi-Fi network.
-- When CONNECT and 3 flashes your appliance is
connected to the home network.
3. Follow the directions in the app.
STEP 3: Connect your appliance to the
Home Connect™ app
Please enter STEP 3 only when prompted by the app. The
following steps describe operations at the appliance itself.
1. Press and hold the CONNECT button until 0 and
CONNECT flash.
2. Follow the directions in the app.
-- The registration process is complete once
CONNECT stops flashing on the hood.
You have successfully connected your appliance. You can
now benefit from all the advantages of the Home
Connect™ app!
NOTICE:
ERROR: The appliance fails to connect to the app (the
CONNECT light will turn OFF).
FIX: Ensure your smartphone or tablet is connected to
the same home network (Wi-Fi). Check that your
wireless connection is stable and has a strong signal.
Then repeat the process from STEP 2.2.
Connecting your appliance to another
Home Connect account
If you want to change the wireless home network that is
connected to the hood, reset the connection to your hood
by:
1. Press and hold the CONNECT and 0 buttons on your
hood for at least 3 seconds.
-- The CONNECT button will turn off.
2. Repeat the connection to your home network.