Fein BLK1.3TE Mode D'emploi page 12

OBJ_BUCH-0000000077-001.book Page 12 Wednesday, July 18, 2012 8:10 AM
en
12
Adjustments.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Setting the cutting direction
(BLK1.3TE/ BLK1.3CSE/BLK1.6E/
BLK1.6LE/BLK2.0E) (figure 3).
Unscrew the union nut approx. 3 turns.
Pull the die downward.
Turn the die in the cutting direction, then
push it up ensuring that the die engages in the
groove.
Tighten the union nut.
Fig.3
Union nut
Die
3.
5.
1.
2.
3.
4.