Fein BLK1.3TE Mode D'emploi page 23

OBJ_BUCH-0000000077-001.book Page 23 Wednesday, July 18, 2012 8:10 AM
Mounting the profile set (BLK1.6E)
(figure 19).
Ideal for cutting deep-channel trapezoidal
sheet metal.
Loosen the union nut; remove the die holder
and the punch.
Pull the punch extension somewhat out of
the profile set (upward) and insert it laterally
into the groove.
Mount the profile set.
Tighten the union nut.
To replace the punch, pull it out completely
together with the punch extension.
Fig.19
Union nut
1.
3.
2.
4.
6.
5.
en
23
Die
Extension