Fein BLK1.3TE Mode D'emploi page 20

OBJ_BUCH-0000000077-001.book Page 20 Wednesday, July 18, 2012 8:10 AM
en
20
Replacing the die (BLK1.3TE/
BLK1.3CSE) (figure 13).
Loosen the union nut, then pull out the die.
Remove the die and mount a new one.
Tighten the union nut.
Replacing the die (BLK1.6E)
(figure 14).
Loosen the screw, then pull out the die.
Remove the die and mount a new one.
Tighten the union nut.
Replacing the die (BLK2.0)
(figure 15).
Remove the snap ring and push out the cylin-
drical pin.
Replace the die.
Push in the cylindrical pin and remount the
snap ring.
Fig.13
4.
3.
2.
1.
Union nut
Fig.14
Die
3.
4.
1.
Union nut
Fig.15
1.
2.
Snap ring
5.
Die
6.
5.
6.
4.
3.
Cylindrical pin