Fein BLK1.3TE Mode D'emploi page 19

OBJ_BUCH-0000000077-001.book Page 19 Wednesday, July 18, 2012 8:10 AM
Replacing the punch (BLK5.0)
(figure 12).
Turn locking lever 90° counterclockwise.
Turn the die counterclockwise by 45° and
pull it off.
Replace the punch by turning it 180° clock-
wise and then pulling it out.
Apply a light coat of grease to the new punch
before inserting it.
Reinsert a punch and turn it counterclockwise
by 180°.
Remount the die and turn it counterclockwise
by 45°.
Turn the locking lever 90° clockwise.
Fig.12
3.
45°
2.
180°
4.
Die
Punch
180°
8.
9.
10.
45°
en
19
1.
90°
Locking lever
5.
6.
7.
90°
11.