Model No.: V8
Operating Voltage: 240V / 50Hz
Power Consumption: 120W
Max. Width for Shrink-wrapping: 300mm
Vacuum Value: -65~-95Kpa
Product Dimension: 421*113*112mm (16.57*4.44*4.41 Inches)
No.
Problems
1
Do not vacuumize
Vacuumizing is
2
slow, vacuuming
is not sealed
Causes
Sealing leakage will lead to no
vacuumization or vacuumization
without sealing, the reasons
include:
1. Vacuum bag: if the bag is
damaged, the opening of the bag
is not cut flat, the opening of the
bag is not placed in the air
extraction chamber, the opening
of the bag is wrinkled/overlapped,
the bag is much full, or the
reserved sealing width of the bag
is insufficient, or the vacuum bag
for non-vacuum machine is used
2. The machine sealing work area
is not smooth, resulting in seal
leakage: for example, the gray
sealing pad of the drip box is
loose and not smooth, and there
are foreign bodies left at the seal
1. Choose the "external pumping"
mode
2. The size of the vacuum bag is
too large, or the vacuum bag is
damaged and not sealed
completely
3. The vacuum bag is much full
1. Select the "DRY" or "MOIST"
function. Install the external tap
back to the machine before use
2. Use a bag suitable for vacuum
machine (size: 200mm*300mm
bag), and the size and capacity
meet the requirements of the
product, keep the bag opening
cut smooth, no damage to the
bag;Place the opening of the bag
at the entrance of the machine
correctly according to the
instructions, and push it to the
bottom (it is better if the opening
of the roll belt is downward)
3. Put the gray sealing pad of the
drip box back into the machine
and press it flat to keep the
sealing working area clean and
free of foreign matter residue
1. In external pumping mode, the
machine will not automatically
seal. Re-select the "DRY" or
"MOIST" function
2. Select the "DRY" or "MOIST"
mode, and select a vacuum bag
that meets the size and capacity
of the product. For details, see "No
vacuum-pumping"
3. It is recommended that the
vacuum bag be filled with no
more than 2/3 of the bag
capacity
32