FRESKO V8 Mode D'emploi page 27

(1)Unplug the external vacuum plug and there is going to be a
"drip" sound. The white lights of "DRY", "MOIST" and "SEAL" turn off
and the external vacuum is always on.
(2) Press the "EXTERNAL vacuum" button, the vacuum sealer starts
working and the white light of the "EXTERNAL vacuum" button
flashes.
(3)If the vacuum sealer reaches negative pressure, it will stop
pumping automatically. The "EXTERNAL vacuum" stops flashing,
the machine is automatically deflated and enters standby mode.
(1)Put the special wine stopper into the bottle (please note that
the wine stopper is not included in the delivery).
(2)Unplug the external vacuum plug and turn off the white lights
of "DRY", "MOIST" and "SEAL".
(3)Remove the front transparent part of the connector and insert
the tip of the external vacuum plug into the wine stopper.
(4)Press the "external vacuum" button and the vacuum sealer will
start working.
(5)The vacuum sealer will stop pumping automatically when the
negative pressure is reached. The "external vacuum" will stop
flashing and the machine will automatically deflate and enter
standby mode.
25