Broiling - Samsung NX58 4311S Serie Manuel D'utilisation

Operating the oven
To change a programmed starting time, press the Delay Start pad, enter the new
starting time, and then press the START/SET pad. The oven will start cooking at
the new start time.
To change a programmed baking temperature, press the Bake pad, enter the new
baking temperature, and then press the START/SET pad. If the oven temperature is
above the new setting, the oven will beep 6 times, then show the new setting.
The oven will complete cooking at the new temperature.
To change a programmed cooking time, press the Cook Time pad, enter the new
cooking time, and then press the START/SET pad. The oven will continue cooking
for the remaining new set time.
NOTE
Place food in the oven after preheating if the recipe calls for it. Preheating is
important for good baking results. After the oven has reached the desired cooking
temperature, it will beep 6 times.
36 English

Broiling

The Broil function allows you to cook and brown foods using only a top heat
source. The oven door must remain closed during broiling. The meat or fish should
always be placed on a broiling grid in a broiling pan.
CAUTION
If a fire occurs during broiling, leave the oven door closed and turn off the
oven. If the fire continues, throw baking soda on the fire or use a foam-type fire
extinguisher. Do not put water or flour on the fire. Flour may explode and water
can cause a grease fire to spread. Both can cause personal injury and/or property
damage.
How to set the oven for broiling
1. Place the food on a broiling pan with
insert grid. Place the food and pan
on the top oven rack, positioned as
recommended in the Recommended
broiling guide on page 37. Close the
oven door.
2. Press the Broil pad once for Hi and
twice for Lo. The oven will beep every
time a pad is pressed.
Use Lo to cook foods such as poultry or
thick cuts of meat thoroughly without
overbrowning them.