Information Codes - Samsung NX58 4311S Serie Manuel D'utilisation

Troubleshooting
PROBLEM POSSIBLE CAUSE
Oven racks
are difficult to
slide.
Warming The drawer is not properly
drawer or aligned with the full-
storage drawer extension roller guide rails or
does not slide nylon drawer guides.
smoothly or
The contents in the drawer
drags.
are too heavy.
64 English
SOLUTION
Apply a small amount of
vegetable oil to a paper towel
and wipe edges of the oven
racks with the paper towel.
Racks become dull and hard
to slide when they are left in
the oven during a self-clean
cycle.
Remove and replace the
drawer. (See page 54.)
Reduce the weight and/or
redistribute the contents in
the drawer.

Information codes

CODE SYMBOL MEANING
Shorted Key.
Oven sensor opened problem.
Oven sensor shorted problem.
Oven overheating.
Door locking error.
For any codes not listed above, or if the suggested solution does not fix the
problem, call 1-800-SAMSUNG (726-7864).
SOLUTION
Press the OVEN OFF pad and
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the
power.
If this does not solve the
problem, call for service.
See the instructions below
this chart.