ELECTRICAL WARNINGS
Comply with the following electrical instructions and
requirements to avoid death, personal injury from electric
shock, and/or property damage from fire:
1. Plug into a grounded 3-prong outlet.
2. DO NOT remove the ground prong.
3. DO NOT use an adapter.
4. NEVER use an extension cord.
Use a dedicated 120-volt, 60-Hz, 20-amp, AC, fused
electrical circuit for this appliance. A time-delay fuse or
circuit breaker is recommended. DO NOT plug more than
one appliance into this circuit.
The range is supplied with a 3-pronged grounded plug.
This cord MUST be plugged into a mating, grounded
3-prong outlet that meets all local codes and ordinances. If
you are unsure your electrical outlet is properly grounded,
have it checked by a licensed electrician.
If codes permit the use of a separate ground wire, we
recommend that a qualified electrician determine the
proper path for this ground wire.
Electrical service to the range must conform to local codes.
Barring local codes, it should meet the latest ANSI/NFPA
No. 70 – Latest Revision (for the U.S.) or the Canadian
Electrical Code CSA C22.1 – Latest Revisions.
It is the personal responsibility of the appliance owner to
provide the correct electrical service for this appliance.
NEVER connect the ground wire to plastic plumbing lines,
gas lines, or hot water pipes.
DO NOT modify the plug provided with the appliance.
DO NOT put a fuse in a neutral or ground circuit.
SAVE THESE INSTRUCTIONS
English 11