MS Schippers 2.0 Mode D'emploi page 26

 The indicator hose, which is connected to the bottom of the control unit, should be
placed approx 5 metres in front of the disinfection gate. When a vehicle passes the
hose, this will activate the pump which will spray for the required period.
Before putting the disinfection gate into use, the pump must be filled with water with a water
hose. In this case, the dosage tap has to be closed. Otherwise the pump cannot suck. When
the barrel and the pump are completely filled with water, the dosage tap can be opened and
the disinfection gate is ready for use. (approximately half a turn)
You can check if all parts are delivered by checking the parts list further in this manual.
26