Environmental Protection; Functions; Power Switch - Triton MOD001 Instructions D'utilisation Et Consignes De Sécurité

SYMBOLS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your local authority or retailer for
recycling advice.
Always wear ear, eye and respiratory
protection.
Conforms to relevant legislation
and safety standards.

FUNCTIONS

POWER SWITCH

When the router is connected to power the
switch (11) will illuminate (in both "on" and "off"
positions).
The retracting switch shutter (12) prevents
accidental starting of the router. It must be
retracted before the router can be switched on.
The cover will remain open until the router is
switched off.
CUT DEPTH ADJUSTMENT
There are three methods of cut depth
adjustment, depending on the accuracy and
control required: Free Plunge, for conventional &
fast depth adjustment; Handle Winder Plunge, for
controlled & fast adjustment; and Micro Adjuster,
GB
for precise depth setting throughout the full
plunge range.
6 Symbols/Functions
MOF001 Manual_new1.indd 6
Instruction warning.
Instruction note.
Double insulated for additional
protection.
Free Plunge
1. Free plunge depth
adjustments can be
made with the Plunge
Mode Selector button
(5) engaged. Press it
deep inside the handle
until it engages inward.
2. Release the Plunge Lock Lever (15). Push the
body of the router until the desired depth is
reached. Re-lock the plunge lock lever.
The position of the plunge lock lever
can be altered by removing its retaining
screw and repositioning the lever on the
bolt. Re-tighten firmly.
Handle winder plunge
1. Handle Winder Plunge
depth adjustments
can be made when the
plunge mode
selector button is flush
with the handle.
If engaged, press the
Plunge Mode
Selector button (5)
inward and allow it to spring out flush with the
handle. Ensure the Plunge Lock Lever (15) is
unlocked.
27/10/09 10:05:58