Wall Mounting (Optional) - Ezviz C6B Guide Rapide

Wall Mounting (Optional)

The camera can be mounted on the wall or ceiling.
• Make sure the wall is strong enough to withstand three times the camera's weight.
• The installation surface should be clean and flat.
1. (Optional) If you want to install the microSD card, insert the microSD card into the microSD
card slot on the rear side of the camera. Otherwise, you can skip this step.
2. Attach the camera base to the place where you want to affix the camera.
3. (Optional) If the wall is solid, drill and insert three expansion screws.
4. Affix the camera base onto the template using the three metal screws.
Solid Wall
5. Make sure the
6. Install the camera on the base, and turn it 15° to secure it.
7. Connect the power cable to the camera. If the camera was previously connected to the Wi-
Fi network, it will automatically connect to the same Wi-Fi network.
on the base towards you and fix the base to the wall with three screws.
5
Wooden Wall