Hamilton Beach Compact Stack & Snap 70510 Mode D'emploi page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
PROBLEM
Unit does not operate
on any speed or Pulse.
Food is not sliced or
shredded uniformly.
Unit stops and will
not come back on.
Unit has a burning smell.
Motor seems weak.
Cheese is not shredding well. • Cheese should be processed immediately after being removed from the refrigerator. Soft cheese like
PROBABLE CAUSE/SOLUTION
• Is the unit plugged in? Does the outlet work?
• Is the lid locked in place? See "How to Use" sections.
• Packing too much food in the food chute or pushing too hard on the food pusher may cause the
processed food to be irregular.
• Is the lid locked in place? See "How to Use" sections.
• Is the outlet still working? Check it by plugging in a working lamp or other appliance. You may have
overloaded the circuit and blown a fuse or tripped the circuit breaker.
• If none of these suggestions correct the problem, DO NOT attempt to repair the unit. Call the Customer
Service number.
• There may be a residue left on the motor from the manufacturing process, causing a slight odor
during initial use. This will go away. If a strong odor or any visible smoke appears, unplug unit
IMMEDIATELY and call the Customer Service number.
• Are you using the recommended food size and quantity to be processed? Refer to the Food Processing
Chart for recommended food sizes and speeds.
mozzarella should be placed in the freezer for 30 minutes prior to processing to ensure it is firm enough
for shredding.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Stack&snap 70510

Table des Matières